Dating fender jazz
Fender lists historical sales data and dating information on this blog for free.Fender Blog is a free used guitar Price Guide Price List to find values of all Fender guitars, basses, amps and more.
Most notably, PRODUCTION DATES have been penciled or stamped on the butt end of the heel of the neck of most guitars and basses, although there were periods when this was not consistently done (1973 to 1981, for example) or simply omitted. instrument production history, PRODUCTION DATES have been applied to various components.Neck-dating can be useful in determining the was produced, rather than the complete instrument.The following chart details the Fender serial number schemes used from 1965 to 1976.You will notice that there is quite a bit of overlap of both numbers and years.They have been placed at the top of the neck plate, on the front of the headstock, on the back of the headstock, and on the back of the neck near where the neck bolts onto the body.
They were stamped on the back vibrato cover plate (early '50s Strats), and on the bridge plate between the pickup and the saddles on some Telecasters.
If you have what you consider to be a somewhat "odd" serial number, please check the following chart to see if you find your serial number configuration here.
This chart contains If you are unable to place the approximate year of manufacture of your instrument using the above charts, there are a few great books available, which have invaluable information on the history of Fender instruments.
The "S", stood for decade of the 1970s, and began CBS' attempt to use serial numbers to identify the year of production for the piece.
The "E", stood for the decade of the 1980s and was, as shown below, introduced in 1979. "V" prefix serial numbered instruments, is to remove the neck, and check the butt end of the heel of the neck for a production date, which may be stamped or written there.
Also free classifieds and current basses are listed. I hope readers will visit your site after reading this information.